Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Ford Taurus X SEL, FWDFACTORY OEM SERVICE PROCEDURE
Brake System DTCS
DRIVER SEAT MODULE (DSM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Source | Perform Test |
|---|---|---|---|
| B1987 | Pedal Forward/Rearward Motor Stalled | Driver Seat Module (DSM) | Go to Pinpoint Test C . |
| B1988 | Pedal Position Forward Switch Circuit Short to Battery | DSM | Go to Pinpoint Test B . |
| B1989 | Pedal Position Rearward Switch Circuit Short to Battery | DSM | Go to Pinpoint Test B . |
| B1991 | Pedal Forward/Rearward Potentiometer Feedback Circuit Short to Battery | DSM | Go to Pinpoint Test C . |
| B2275 | Pedal Forward/Rearward Potentiometer Feedback Circuit Short to Ground | DSM | Go to Pinpoint Test C . |
| - | All Other DSM DTCs | DSM | REFER to the Driver Seat Module (DSM) DTC Table in SEATING article. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
