2009 Ford Taurus SEFACTORY OEM SERVICE PROCEDURE

Inspection and Verification

This article provides step-by-step module configuration procedures. Carry out the PMI procedures in this information when another article directs to carry out "configuration" or when DTCs from the list below are present:

DIAGNOSTIC TROUBLE CODE (DTC) CHART

DTC Description Source Action
B2477 Module Configuration Failure ABS module
Accessory protocol interface module (APIM)
Audio control module (ACM)
Driver seat module (DSM)
Instrument cluster (IC)
Rear entertainment module (RETM)
Parking aid module (PAM)
Restraints control module (RCM)
Satellite digital audio receiver system (SDARS) module
Smart junction box (SJB)
Steering effort control module (SECM)
CARRY OUT programmable module installation (PMI). REFER to Programmable Module InstallationΒ .
B2900 VIN Mismatch ABS module
RCM
4X4 control module
CARRY OUT PMI. REFER to Programmable Module InstallationΒ .
B2A21 One or More Configuration Files Missing/Corrupt SJB CARRY OUT PMI. REFER to Programmable Module InstallationΒ .
P0602 Powertrain Control Module Programming Error PCM CARRY OUT PMI. REFER to Programmable Module InstallationΒ .
P0605 Internal Control Module Read Only Memory (ROM) Error PCM CARRY OUT PMI. REFER to Programmable Module InstallationΒ .
P1639 Vehicle ID Block Corrupted, Not Programmed PCM CARRY OUT PMI. REFER to Programmable Module InstallationΒ .
U0300 Internal Control Module Software Incompatibility PCM
HVAC module
CARRY OUT PMI. REFER to Programmable Module InstallationΒ .
U0301 Software Incompatibility with Engine/Powertrain Control Module PCM CARRY OUT PMI. REFER to Programmable Module InstallationΒ .
U2050 No Application Present ABS module
ACM
APIM
DSM
HVAC module
IC
LTM
Occupant classification system module (OCSM)
PCM
RETM
RCM
SDARS module
SECM
SJB
4X4 control module
CARRY OUT PMI. REFER to Programmable Module InstallationΒ .
U2051 One or More Calibration Files Missing / Corrupt ACM
HVAC module
LTM
OCSM
PCM
4X4 control module
CARRY OUT PMI. REFER to Programmable Module InstallationΒ .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.