2009 Ford Flex SEFACTORY OEM SERVICE PROCEDURE

Material Specifications

MATERIAL SPECIFICATIONS

Item Specification Fill Capacity
High Temperature Nickel Anti-Seize Lubricant XL-2 ESE-M12A4-A -
Motorcraft® Premium Gold Engine Coolant with Bittering Agent (bittered in US only)
VC-7-B (US); CVC-7-A (Canada); or equivalent (yellow color)
WSS-M97B51-A1 (1)
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil
XO-5W20-QSP (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent
WSS-M2C930-A -
Motorcraft® Specialty Green Engine Coolant VC-10-A (US); CVC-10-A (Canada) WSS-M97B55-A (1)
Penetrating and Lock Lubricant (US);
Penetrating Fluid (Canada)
XL-1 (US); CXC-51-A (Canada)
- -
(1) Early build vehicle (built before January 19, 2009) cooling systems are filled with Motorcraft® Premium Gold Engine Coolant. Late build vehicle (built on or after January 19, 2009) cooling systems are filled with Motorcraft® Specialty Green Engine Coolant. Mixing coolant types degrades the corrosion protection of the coolant. Do not mix coolant types. Failure to follow these instructions may result in engine or cooling system damage.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.