Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Ford Escape Hybrid, FWDFACTORY OEM SERVICE PROCEDURE
Module Configuration and Parameter Chart - Hybrid
MODULE CONFIGURATION AND PARAMETER CHART - HYBRID
| Module | Module Address | Requires PMI | Reprogram/Flash Capable | Requires Adaptive Learning or Calibration | Available Programmable Parameters |
|---|---|---|---|---|---|
| 4X4 control module | 761 | No | No | No | None |
| ABS module | 760 | Yes | Yes | No | None |
| ACM (without navigation) | 727 | Yes | Yes | No |
|
| ACM (with navigation) | 727 | Yes | Yes | No |
|
| APIM | 7D0 | Yes | Yes | No |
|
| FCIM | 7A7 | Yes | No | No | None |
| FDIM | 7A6 | Yes | Yes | No |
|
| HVAC module | 733 | No | No | No | None |
| IC | 720 | Yes | Yes | No |
|
| OCSM | 765 | No | No |
|
None |
| PAM | B2 | No | Yes | No | None |
| PSCM | 730 | Yes | Yes | No | None |
| PCM | 7E0 | Yes | Yes |
|
|
| RCM | 737 | Yes | Yes |
|
|
| SDARS module | 782 | Yes | Yes | No |
|
| SJB | 726 | Yes | Yes |
|
|
| Battery Control Module (BCM) | 745 | No | No | No | None |
| Transmission Control Module (TCM) | 7E1 | No | No | No | None |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
