Quick Lookups: Fluids

2009 Ford Edge Sport, FWDSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 4.00 OZS. 0.11 L PAG 46 S
Air Cond Refrigerant 1.20 LBS. 0.54 KG R-134a S
Automatic Transmission Fluid 10.00 QTS. 9.46 L MOTORCRAFT Automatic Transmission Fluid MERCON V Approximate dry capacity, includes cooler line. Fluid level indicator should be used to determine actual fluid requirements and fluid specifications. Check level at normal operating temperature. DO NOT overfill. DO NOT mix MERCON and MERCON V. S
Brake Fluid N/A N/A MOTORCRAFT High Performance DOT 3 Motor Vehicle Brake Fluid Fill to line on reservoir. S
Differential Gear Oil Rear 2.40 PTS. 1.13 L SAE 80W-90 Premium Rear Axle Gear Oil S
Engine Coolant w/o Trailer Towing Package 11.70 QTS. 11.07 L FORD Premium Gold Engine Coolant w/bittering agent Add the coolant type originally equipped in the vehicle. S
Engine Coolant w/Trailer Towing Package 12.83 QTS. 12.14 L FORD Premium Gold Engine Coolant w/bittering agent Add the coolant type originally equipped in the vehicle. S
Engine Oil w/Filter 5.50 QTS. 5.2 L SAE 5W-20 Premium Synthetic Blend Motor Oil Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only to meet the requirements of FORD Specification: WSS-M2C930-A and the API Certification mark. S
Fuel Tank FWD 19.20 GALS. 72.67 L S
Power Steering Fluid N/A N/A MOTORCRAFT Automatic Transmission Fluid MERCON V Fill to line on reservoir. S
Windshield Washer Fluid 4.75 QTS. 4.49 L MOTORCRAFT Premium Windshield Washer Concentrate Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.