Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2008 Ford Taurus AWD V6-3.5LFACTORY OEM SERVICE PROCEDURE
General Specifications
Item Specification
A/C Compressor
Type FS20 fixed piston
Rotation Clockwise
A/C Compressor Magnetic Clutch
Air gap clearance average 0.35-0.65 mm (0.014-0.026 in)
A/C Pressure Relief Valve(a)
Close pressure 2,756 kPa (400 psi)
Open pressures 3,792-4,137 kPa (550-600 psi)
Evaporator Discharge Air Temperature Sensor
Off temperature 5.5°C (42°F)
On temperature 6.6°C (44°F)
(a) Manifold gauge set pressures may vary slightly depending on the distance between the service gauge port valve and the A/C pressure relief valve, the A/C cycling switch or the pressure cutoff switch location.
A/C Compressor
Type FS20 fixed piston
Rotation Clockwise
A/C Compressor Magnetic Clutch
Air gap clearance average 0.35-0.65 mm (0.014-0.026 in)
A/C Pressure Relief Valve(a)
Close pressure 2,756 kPa (400 psi)
Open pressures 3,792-4,137 kPa (550-600 psi)
Evaporator Discharge Air Temperature Sensor
Off temperature 5.5°C (42°F)
On temperature 6.6°C (44°F)
(a) Manifold gauge set pressures may vary slightly depending on the distance between the service gauge port valve and the A/C pressure relief valve, the A/C cycling switch or the pressure cutoff switch location.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.