2008 Ford Explorer 4.0 E, AWDFACTORY OEM SERVICE PROCEDURE

Module Configuration

DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC Description Source Perform Test
B2477 Module Configuration Failure
  • ABS module
  • Audio control module (ACM)
  • Driver seat module (DSM)
  • Heating ventilation air conditioning (HVAC) module
  • Instrument cluster (IC)
  • Parking aid module (PAM) (Mountaineer, Explorer Sport Trac)
  • Rear entertainment module (RETM)
  • Restraints control module (RCM)
  • Satellite digital audio receiver system (SDARS) module
  • Smart junction box (SJB)
CARRY OUT PMI. REFER to Programmable Module Installation .
B2477 Module Configuration Failure
  • Accessory protocol interface module (APIM)
REFER to Accessory Protocol Interface Module (APIM) Programming .
B2477 Module Configuration Failure
  • Occupant classification system module (OCSM)
INSTALL a new OCSM. REFER to SUPPLEMENTAL RESTRAINT SYSTEM article.
B2900 VIN mismatch
  • ABS module
CARRY OUT PMI. REFER to Programmable Module Installation .
P0602 Powertrain Control Module Programming Error
  • PCM
CARRY OUT PMI. REFER to Programmable Module Installation .
P0605 Internal Control Module Read Only Memory (ROM) Error
  • PCM
CARRY OUT PMI. REFER to Programmable Module Installation .
P0605 Internal Control Module Read Only Memory (ROM) Error
  • Transmission control module (TCM)
INSTALL a new TCM. REFER to AUTOMATIC TRANSAXLE/TRANSMISSION - 6R60 article.
P1639 Vehicle ID Block Corrupted, Not Programmed
  • PCM
CARRY OUT PMI. REFER to Programmable Module Installation .
U0300 Internal Module Software Incompatibility
  • RCM
CARRY OUT PMI. REFER to Programmable Module Installation .
U2050 No Application Present
  • ABS module
  • ACM
  • DSM
  • HVAC module
  • IC
  • Power running board (PRB) module
  • RCM
  • RETM
  • SDARS module
  • SJB
  • 4X4 control module
CARRY OUT PMI. REFER to Programmable Module Installation .
U2050 No Application Present
  • APIM
REFER to Accessory Protocol Interface Module (APIM) Programming .
U2050 No Application Present
  • OCSM
INSTALL a new OCSM. REFER to SUPPLEMENTAL RESTRAINT SYSTEM article.
U2051 One or More Calibration Files Missing / Corrupt
  • ACM
  • IC
  • RCM
CARRY OUT PMI. REFER to Programmable Module Installation .
U2051 One or More Calibration Files Missing / Corrupt
  • OCSM
INSTALL a new OCSM. REFER to SUPPLEMENTAL RESTRAINT SYSTEM article.
U2051 One or More Calibration Files Missing / Corrupt
  • Parking aid module (PAM)
INSTALL a new PAM. REFER to PARKING AID article.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.