Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2008 Ford Explorer 2WD V6-4.0LFACTORY OEM SERVICE PROCEDURE
Switch State Control
KEY PROGRAMMING SWITCH STATE CONTROL
Special Tool(s)
NOTE:
- The spare key programming switch is a programmable switch which provides the capability to enable/disable the normal customer spare key programming procedure detailed in the Owner's Literature. It must read ENABLE if more than 2 keys need to be programmed into the instrument cluster (IC). For additional information, refer to Key Programming Using Two Programmed Keys. This programmable switch is provided as a convenience for rental company fleets or other fleet purchasers who may not want the spare key programming procedure available to the vehicle driver. Using Two Programmed Keys
- The spare key programming switch state can be viewed with the IC PID SPAREKEY.
- If the SPAREKEY PID reads ENABLE, up to 8 keys total can be programmed into the IC using Key Programming Using Two Programmed Keys. If the SPAREKEY PID reads DISABLED, the Key Programming Using Two Programmed Keys procedure will not function. This switch is set to ENABLE when the vehicle is built. This PID does not affect the Key Programming Using Diagnostic Equipment, the Spare Key Programming - Unlimited Key Mode or the Spare Key Programming - Using Diagnostic Equipment procedures.
1. Insert a programmed passive anti-theft system (PATS) key into the ignition lock cylinder and turn the key from the OFF position to the ON position.
2. From the scan tool, follow the on-screen instructions to ENTER SECURITY ACCESS. For additional information, refer to Anti-Theft Security Access. Anti-Theft Security Access
3. NOTE: The default setting of the key programming switch on delivery of all new vehicles is ENABLED, when viewing the IC PID SPAREKEY.
From the scan tool menu select: "Customer Spare Key Programming Enable" (or "Customer Spare Key Programming Disable"), and press the tick mark.
- "Customer Spare Key Programming Enable" - the spare key programming procedure is accessible.
- "Customer Spare Key Programming Disable" - the spare key programming procedure is not accessible.
Special Tool(s)
Special Tool(s):
NOTE:
- The spare key programming switch is a programmable switch which provides the capability to enable/disable the normal customer spare key programming procedure detailed in the Owner's Literature. It must read ENABLE if more than 2 keys need to be programmed into the instrument cluster (IC). For additional information, refer to Key Programming Using Two Programmed Keys. This programmable switch is provided as a convenience for rental company fleets or other fleet purchasers who may not want the spare key programming procedure available to the vehicle driver. Using Two Programmed Keys
- The spare key programming switch state can be viewed with the IC PID SPAREKEY.
- If the SPAREKEY PID reads ENABLE, up to 8 keys total can be programmed into the IC using Key Programming Using Two Programmed Keys. If the SPAREKEY PID reads DISABLED, the Key Programming Using Two Programmed Keys procedure will not function. This switch is set to ENABLE when the vehicle is built. This PID does not affect the Key Programming Using Diagnostic Equipment, the Spare Key Programming - Unlimited Key Mode or the Spare Key Programming - Using Diagnostic Equipment procedures.
1. Insert a programmed passive anti-theft system (PATS) key into the ignition lock cylinder and turn the key from the OFF position to the ON position.
2. From the scan tool, follow the on-screen instructions to ENTER SECURITY ACCESS. For additional information, refer to Anti-Theft Security Access. Anti-Theft Security Access
3. NOTE: The default setting of the key programming switch on delivery of all new vehicles is ENABLED, when viewing the IC PID SPAREKEY.
From the scan tool menu select: "Customer Spare Key Programming Enable" (or "Customer Spare Key Programming Disable"), and press the tick mark.
- "Customer Spare Key Programming Enable" - the spare key programming procedure is accessible.
- "Customer Spare Key Programming Disable" - the spare key programming procedure is not accessible.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.