2008 Ford Expedition 4WDFACTORY OEM SERVICE PROCEDURE

Audio Control Module (ACM)

AUDIO CONTROL MODULE (ACM) DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC Description Perform Test
B1136 Audio Steering Wheel Switch #2 Circuit Failure Go to Pinpoint Test J .
B1154 Subwoofer #1 Short to Ground Go to Pinpoint Test F .
B1155 Subwoofer #1 Short to Battery Go to Pinpoint Test F .
B2103 Antenna Not Connected Go to Pinpoint Test A .
B2204 GPS Antenna Connection Open or Short Go to Pinpoint Test O .
B2404 Audio Steering Wheel Switch Circuit Fault Go to Pinpoint Test J .
B2633 Driver-Front Microphone Circuit Failure Go to Pinpoint Test N .
B2913 Audio Subwoofer Not Connected Go to Pinpoint Test F .
B2965 Audio System Speaker Circuit Fault For vehicles with a bench seat, go to Pinpoint Test B .
For vehicles without a bench seat or THX® audio system, go to Pinpoint Test C .
For vehicles with THX® audio system, go to Pinpoint Test D .
U0155 Lost Communication With Instrument Panel Cluster (IC) Control Module
NOTE: If no related concern is currently present, disregard the DTC.
If the speed sensitive volume does not operate correctly, go to Pinpoint Test R .If the navigation is inaccurate, go to Pinpoint Test S .
U0159 Lost Communication With Parking Assist Control Module (PAM) DISREGARD the DTC. CLEAR the DTCs. REPEAT the self-test.
U0193 Lost Communication With Digital Audio Control Module (SDARS) Go to Pinpoint Test K .
U0196 Lost Communication With Entertainment Control Module - Rear (AUX) Go to Pinpoint Test G .
U0197 Lost Communication With Telephone Control Module DISREGARD the DTC. CLEAR the DTCs. REPEAT the self-test.
U0238 Lost Communication With Digital Audio Control Module "D" (DSP) Go to Pinpoint Test E .
U2473 Unexpected Vehicle Speed (VSS) If the speed sensitive volume is inoperative, go to Pinpoint Test R .
If the navigation is inaccurate, go to Pinpoint Test S .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.