2008 Ford Expedition 4WDFACTORY OEM SERVICE PROCEDURE

Torque Specifications

TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
Accessory drive belt tensioner bolt 25 18 -
Air cleaner outlet pipe-to-throttle body (TB) adapter bolt 10 - 89
Axle housing mounting bolts 89 66 -
Camshaft bearing cap boltsa - - -
Camshaft phases and sprocket boltsa - - -
Camshaft position (CMP) sensor bolt 10 - 89
Charge motion control valve (CMCV) bolts 10 - 89
Coolant pump bolts 25 18 -
Coolant pump pulley bolts 25 18 -
Coolant tube stud bolt 10 - 89
Cooling fan shroud bolts 10 - 89
Connecting rod boltsa - - -
Crankshaft damper pulley bolta - - -
Crankshaft main bearing bolts (cross-mounted)a - - -
Crankshaft main bearing bolts (vertical)a - - -
Crankshaft position (CKP) sensor bolt 10 - 89
Cylinder block drain plugs 24 18 -
Cylinder heads boltsa - - -
Cylinder head temperature sensor (CHT) 26 19 -
Drive belt idler pulley bolt 25 18 -
Engine front cover boltsa - - -
Engine oil pressure (EOP) switch 18 13 -
Engine support insulator-to-cylinder block bolts 63 46 -
Engine support insulator through bolt 350 258 -
Engine support insulator-to-frame bolts 175 129 -
Engine support insulator-to-frame nuts 175 129 -
Engine support insulator-to-frame stud bolt 15 11 -
Exhaust manifold heat shield bolts 10 - 89
Exhaust manifold nuts 25 18 -
Exhaust manifold studs 12 9 -
Exhaust manifold-to-Y-pipe nuts 40 30 -
Flexplate boltsa - - -
Flexplate inspection cover bolts 35 26 -
Frame crossmember bolts 102 75 -
Fuel rail bracket bolts 10 - 89
Generator lower mounting bolts 25 18 -
Generator upper mounting bracket bolts 10 - 89
Ignition coil 6 - 53
Intake manifold-to-cylinder head boltsa - - -
Intake manifold vacuum tube support bracket nut 10 - 89
Knock sensor (KS) bolts 20 15 -
Oil filter 15 11 -
Oil filter adapter bolts 25 18 -
Oil level indicator tube bolt 10 - 89
Oil pan boltsa - - -
Oil pan drain plug 14 10 -
Oil pump bolts 10 - 89
Oil pump screen and pickup tube bolts 10 - 89
Oil pump screen and pickup tube spacer 25 18 -
Oil pump screen and pickup tube spacer bolt 25 18 -
PCV heater element bolts 6 - 53
Power steering pressure (PSP) hose support bracket nut 10 - 89
Power steering pump bolts 25 18 -
Radiator ignition interference capacitor nut 25 18 -
Radiator support bolts 25 18 -
Radio ignition interference capacitor nut 25 18 -
Rear seal retainer plate boltsa - - -
Spark plugs (early build - black coil boot) 34 25 -
Spark plugs (late build - brown coil boot) 12 9 -
Steering shaft bolt 30 22 -
Thermostat housing bolts 10 - 89
Timing chain guide bolts 10 - 89
Timing chain hydraulic tensioner bolts 25 18 -
Torque converter-to-flexplate nuts 35 26 -
Transmission cooler tube support bracket nut 25 18 -
Transmission fluid cooler tube support bracket nut 10 - 89
Transmission mount-to-crossmember nuts 103 76 -
Transmission-to-engine bolts 48 35 -
Valve cover bolts 10 - 89
Variable camshaft timing (VCT) housing bolts 10 - 89
VCT sprocket assembly boltsa - - -
Wiring harness ground cable 10 - 89

a Refer to the procedure.

Chapter Navigation
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.