2008 Ford Expedition 4WDFACTORY OEM SERVICE PROCEDURE

Engine Mechanical: Mechanical: Engine: Installation: Engine

Special Tools

Illustration Tool Name Tool Number
GF0000339Courtesy of FORD MOTOR CO.
Lifting Bracket, Engine 303-F047 (014-00073) or equivalent
Material

Item Specification
Motorcraft Premium Gold Engine Coolant with Bittering Agent (US only)
VC-7-B (US); CVC-7-A (Canada); or equivalent (yellow color)
WSS-M97B51-A1
Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil
XO-5W20-QSP (US); Motorcraft SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent
WSS-M2C930-A
Threadlock 262
TA-26
WSK-M2G351-A6
  1. Using a suitable floor crane, position the engine assembly into the vehicle.
  2. Remove the special tool.
  3. Fig 1: Identifying Special Tool (303-F047)
    G03920205Courtesy of FORD MOTOR CO.
Chapter Navigation
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.