Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Ford Taurus SEFACTORY OEM SERVICE PROCEDURE
Throttle Body: Notes
| Item | Part Number | Description |
|---|---|---|
| 1 | N605891 | Accelerator/speed control cable bracket bolt (2 required) |
| 2 | 9728 | Accelerator/speed control cable bracket |
| 3 | 9A825 | Speed control cable |
| 4 | 9E894 | Throttle return spring |
| 5 | 9A758 | Accelerator control cable |
| 6 | W701669 | Throttle body (TB) bolt (3 required) |
| 7 | W701632 | TB stud bolt |
| 8 | 9E926 | TB |
| 9 | 14A464 | Throttle position (TP) sensor electrical connector (part of 12B637) |
| 10 | 9E936 | TB gasket |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.