2007 Ford Freestar Base, 4.2 2FACTORY OEM SERVICE PROCEDURE

Module Communications Network

COMMUNICATION NETWORK DIAGNOSTIC TROUBLE CODES (DTC) LIST

DTC Description Source Perform Test
U0073 Control Module Communication Buss Off Anti-lock brake system (ABS) Module REPAIR all other DTCs first. If DTC is still present Go to Pinpoint Test B .
U1262 SCP Communication Bus Fault Instrument Cluster For module that failed network test, go to Symptom Chart.
U1900 CAN Communication Bus Fault-Recieve Error ABS Module For module that failed network test, go to Symptom Chart.
U1900 CAN Communication Bus Fault-Recieve Error Instrument Cluster For module that failed network test, go to Symptom Chart.
U1950 UBP Communication Bus Fault Driver seat module (DSM) For module that failed network test, go to Symptom Chart.
U2023 Fault Received From External Node Instrument cluster RETRIEVE and FOLLOW non-network DTCs from other modules.
All other DTCs - - REFER to MULTIFUNCTION ELECTRONIC MODULES article.
Chapter Navigation
Return to Chapter: Communication Devices
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.