Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Ford Focus STFACTORY OEM SERVICE PROCEDURE
Instrument Cluster DTCS
INSTRUMENT CLUSTER DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Perform Test |
|---|---|---|
| B1202 | Fuel Sender Circuit Open | Go to Pinpoint Test B . |
| B1204 | Fuel Sender Circuit Short to Ground | Go to Pinpoint Test B . |
| B1205 | EIC Switch-1 Assembly Circuit Failure | INSTALL a new instrument cluster. REFER to Instrument Cluster . TEST the system for normal operation. |
| B1342 | Instrument Cluster is Defective | CLEAR the DTCs. REPEAT the self-test. If DTC B1342 is present, INSTALL a new instrument cluster. REFER to Instrument Cluster . TEST the system for normal operation. |
| B1359 | Ignition Run/ACC Circuit Failure | Go to Pinpoint Test A . |
| B2477 | Module Configuration Failure | CONFIGURE the instrument cluster. REFER to MODULE CONFIGURATION article. CLEAR the DTC. REPEAT the self-test. If DTC B2477 is present, INSTALL a new instrument cluster. REFER to Instrument Cluster . TEST the system for normal operation. |
| U1900 | CAN Communication Bus Fault | REFER to MODULE COMMUNICATIONS NETWORK article to continue diagnosis of the communication network. |
| U2196 | Invalid Data for Engine RPM | Go to Pinpoint Test C . |
| U2197 | Invalid Data for Vehicle Speed | Go to Pinpoint Test F . |
| U2199 | Invalid Data for Engine Coolant | Go to Pinpoint Test D . |
| U2200 | Invalid Data for Odometer | Go to Pinpoint Test F . |
RESTRAINTS CONTROL MODULE (RCM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Perform Test |
|---|---|---|
| B1868 | Lamp Air Bag Warning Indicator Circuit Failure | REFER to SUPPLEMENTAL RESTRAINT SYSTEM article. |
| All other DTCs | - | REFER to SUPPLEMENTAL RESTRAINT SYSTEM article. |
GENERIC ELECTRONIC MODULE (GEM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Perform Test |
|---|---|---|
| B1325 | Door Ajar Lamp Circuit Short to Battery | Go to Pinpoint Test H . |
| B1326 | Door Ajar Lamp Circuit Short to Ground | Go to Pinpoint Test H . |
| All other DTCs | - | REFER to MULTIFUNCTION ELECTRONIC MODULES article. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.