2007 Ford Focus L4-2.3L VIN ZFACTORY OEM SERVICE PROCEDURE

General Specifications

Item Specification

A/C Compressor
Type Visteon FS-10 swashplate, 5 double-acting pistons
Displacement 170 cc (10.4 cu in)
Rotation Clockwise

A/C Pressure Relief Valve(a)
Open pressure 3,792-4,137 kPa (550-600 psi)

Evaporator Core Orifice
Color Orange
Diameter 1.45 mm (0.057 in)

Magnetic Clutch
Air gap clearance 0.35-0.75 mm (0.014-0.030 in)

Dual-Function Pressure Switch(a)
Open status 2,896-3,172 kPa (420-460 psi)
Closed status 1,517-1,931 kPa (220-280 psi)

A/C Cycling Switch(a)
Open status 145-159 kPa (21-23 psi)
Closed status 290 kPa (42 psi)

Refrigerant Lubricant and Capacity
Capacity 200 ml (7 oz)

Refrigerant and Capacity
Capacity 0.74 kg (26 oz)

(a) Manifold gauge set pressures may vary slightly depending on the distance between the service gauge port valve and the A/C pressure relief valve, the A/C cycling switch and the pressure cutoff switch location.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.