Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Ford Expedition 4WDFACTORY OEM SERVICE PROCEDURE
Torque Specifications
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| ABS module bolts | 2 | - | 18 |
| Air cleaner outlet clamp | 4 | - | 35 |
| Front floor console bracket lower bolts | 40 | 30 | - |
| Front floor console bracket upper bolts | 9 | - | 80 |
| Front wheel speed sensor harness bolt | 12 | 9 | - |
| Front wheel speed sensor bolt | 18 | 13 | - |
| Hydraulic control unit (HCU)-to-bracket bolts | 9 | - | 80 |
| HCU bracket-to-frame bolts | 20 | 15 | - |
| Master cylinder primary and secondary brake tube fittings | 25 | 18 | - |
| Rear combination valve brake tube fitting | 20 | 15 | - |
| Rear wheel speed sensor bolt | 18 | 13 | - |
| RH and LH front brake tube fitting | 20 | 15 | - |
| Stability control sensor cluster bolts | 12 | 9 | - |
| Steering wheel rotation sensor bolts | 3 | - | 27 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.