Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Ford Edge SE, FWDFACTORY OEM SERVICE PROCEDURE
Climate Control System DTCS
ELECTRONIC AUTOMATIC TEMPERATURE CONTROL (EATC) MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action to Take |
|---|---|---|
| B1251 | A/C In-Vehicle Temperature Sensor Open Circuit | Go to Pinpoint Test A . |
| B1253 | A/C In-Vehicle Temperature Sensor Circuit Short to Ground | Go to Pinpoint Test A . |
| B1255 | A/C Ambient Temperature Sensor Open Circuit | Go to Pinpoint Test B . |
| B1257 | A/C Ambient Temperature Sensor Circuit Short to Ground | Go to Pinpoint Test B . |
| B2427 | RH A/C Solar Radiation Sensor Circuit Short to Ground | Go to Pinpoint Test C . |
| B2426 | RH A/C Solar Radiation Sensor Open Circuit | Go to Pinpoint Test C . |
| B2795 | LH A/C Solar Radiation Sensor Circuit Short to Ground | Go to Pinpoint Test C . |
| B2796 | LH A/C Solar Radiation Sensor Open Circuit | Go to Pinpoint Test C . |
| B2014 | Evaporator Temperature Sensor Circuit Open | Go to Pinpoint Test D . |
| B1947 | Evaporator Temperature Sensor Circuit Short to Ground | Go to Pinpoint Test D . |
| B295A | LH Blend Door Potentiometer Feedback Circuit Open | Go to Pinpoint Test F . |
| B295B | LH Blend Door Potentiometer Feedback Short to Ground | Go to Pinpoint Test F . |
| B226C | LH Blend Door Motor Stalled | Go to Pinpoint Test F . |
| B295C | RH Blend Door Potentiometer Feedback Circuit Open | Go to Pinpoint Test F . |
| B295D | RH Blend Door Potentiometer Feedback Short to Ground | Go to Pinpoint Test F . |
| B226D | RH Blend Door Motor Stalled | Go to Pinpoint Test F . |
| B295E | Mode Door Potentiometer Feedback Circuit Open | Go to Pinpoint Test F . |
| B295F | Mode Door Potentiometer Feedback Short to Ground | Go to Pinpoint Test F . |
| B226E | Mode Door Motor Stalled | Go to Pinpoint Test F . |
| B1318 | Battery Voltage Low | Go to Pinpoint Test G . |
| B2268 | Steering Wheel Control Switch Open Circuit | Go to Pinpoint Test P . |
| B2269 | Steering Wheel Control Switch Circuit Short to Ground | Go to Pinpoint Test P . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.