Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007EDGE FWD V6-3.5LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYCONNECTING ROD BEARING
2007 Ford Edge FWD V6-3.5L
Connecting Rod Bearing
2007 Ford Edge FWD V6-3.5LSECTION Connecting Rod Bearing
Connecting Rod Bearing
Bore diameter
Grade 1 59.866-59.872 mm (2.3569-2.3571 inch)
Grade 2 59.873-59.879 mm (2.3572-2.3574 inch)
Grade 3 59.880-59.886 mm (2.3574-2.3577 inch)
Bearing-to-crankshaft clearance -
Bore diameter
Grade 1 59.866-59.872 mm (2.3569-2.3571 inch)
Grade 2 59.873-59.879 mm (2.3572-2.3574 inch)
Grade 3 59.880-59.886 mm (2.3574-2.3577 inch)
Bearing-to-crankshaft clearance -
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.