2006 Ford Freestar BaseFACTORY OEM SERVICE PROCEDURE

Automatic Transmission: Disassembly: Transaxle

SPECIAL TOOL(S)

G04661221Courtesy of FORD MOTOR CO.
Slide Hammer
100-001 (T50T-100-A)
G04661222Courtesy of FORD MOTOR CO.
Remover, O-Ring Seal
100-010 (T71P-19703-C)
G04661223Courtesy of FORD MOTOR CO.
Step Plate
205-D014 (D80L-630-3)
G04661224Courtesy of FORD MOTOR CO.
Remover, Crankshaft Front Oil Seal
303-107 (T74P-6700-A)
G04661225Courtesy of FORD MOTOR CO.
Installer Front Cover Oil Seal
303-335 (T88T-6701-A)
G04661226Courtesy of FORD MOTOR CO.
Actuator Pin 3/16-Inch Diameter
303-D011 (D80L-100-G)
G04661227Courtesy of FORD MOTOR CO.
Collet 7/16-Inch - 1/2-Inch
303-D016 (D80L-100-M)
G04661228Courtesy of FORD MOTOR CO.
Holding Fixture Transmission
307-003 (T57L-500-B)
G04661229Courtesy of FORD MOTOR CO.
Slide Hammer
307-005 (T59L-100-B)
G04661230Courtesy of FORD MOTOR CO.
Handle, Torque Converter
307-091 (T81P-7902-C)
G04661231Courtesy of FORD MOTOR CO.
Lifting Fixture, Clutch Pack
307-171 (T86P-70389-A)
G04661232Courtesy of FORD MOTOR CO.
Remover/Installer, Servo Piston
307-251 (T92P-70023-A)
G04661233Courtesy of FORD MOTOR CO.
Remover, Torque Converter Fluid Seal
307-309 (T94P-77001-BH)
G04661234Courtesy of FORD MOTOR CO.
Remover, Lube Tube
307-310 (T94P-77001-CH)
G04661235Courtesy of FORD MOTOR CO.
Remover/Installer, Front Clutch
307-316 (T94P-77001-HH)
G04661236Courtesy of FORD MOTOR CO.
Retaining Ring Pliers
307-343 (T95P-77001-AHR)
    CAUTION: The torque converter is heavy. Be careful not to drop it or damage will result.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.