Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Ford Cutaway 6.0 PFACTORY OEM SERVICE PROCEDURE
Configurable Modules
WARNING: This page is about a different car, the 2006 Mercury Mountaineer and 2006 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
The vehicle contains the following modules that are configurable:
- driver seat module (DSM)
- audio unit or audio navigation unit
- digital versatile disk (DVD) player
- smart junction box (SJB)
- instrument cluster
- restraint control module (RCM)
- powertrain control module (PCM)
- anti-lock brake system (ABS) module
- electronic automatic temperature control (EATC) module
- parking aid module
- satellite radio receiver
MODULE CALIBRATION AND PARAMETER INDEX
| Module | Calibration Updatable | Configurable | Programmable Parameter |
|---|---|---|---|
| DSM | Yes | Yes |
|
| Audio Unit or Audio Navigation Unit | Yes | Yes |
|
| DVD Player | Yes | Yes |
|
| SJB | Yes | Yes |
|
| Instrument Cluster | Yes | Yes |
|
| RCM | Yes | Yes |
|
| PCM | Yes | Yes |
|
| ABS Module | Yes | Yes | - |
| EATC Module | Yes | Yes | - |
| Parking Aid Module | No | Yes | - |
| Satellite Radio Receiver | No | Yes | - |
| Retractable Running Board Module | Yes | No | - |
| Transmission Control Module (TCM) | Yes | No | - |
| 4WD Control Module | Yes | No | - |
| Occupant Classification Sensor | Yes | No | - |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
