Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Torque Specifications
2005 Ford GTSECTION Torque Specifications
WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Camshaft position (CMP) sensor bolt | 10 | - | 89 |
| Crankshaft position (CKP) sensor | 10 | - | 89 |
| A/C compressor bolts | 25 | 18 | - |
| CKP sensor wiring harness clip nut | 9 | - | 80 |
| Powertrain control module (PCM) retaining bolt | 10 | - | 89 |
| Throttle position (TP) sensor screws | 3 | - | 27 |
| Mass air flow (MAF) sensor retaining screws | 6 | - | 53 |
| Heated oxygen sensor (HO2S) | 41 | 30 | - |
| Catalyst monitor sensor | 41 | 30 | - |
| Fuel rail pressure and temperature sensor bolts | 5 | - | 44 |
| Cylinder head temperature (CHT) sensor | 26 | 19 | - |
| Lower generator bolt | 25 | 18 | - |
| Generator bracket bolt | 10 | - | 89 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.