Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Ford Freestar BaseFACTORY OEM SERVICE PROCEDURE
Torque Specifications
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Screw retaining the instrument panel lower steering column opening cover to the instrument panel | 12 | 9 | - |
| Screw retaining the instrument panel opening cover reinforcement to the instrument panel | 12 | 9 | - |
| Screw retaining the steering column opening brace to the instrument panel | 12 | 9 | - |
| Screw retaining the selector lever indicator sable to the steering column | 4 | - | 35 |
| Nut retaining the steering column to the instrument panel | 15 | 11 | - |
| Bolt retaining the brake shift interlock actuator and the transmission shift selector position insert to the steering column | 9 | - | 80 |
| Bolt and nut retaining the shift cable bracket to the transaxle | 22 | 16 | - |
| Brake shift interlock actuator | 9 | - | 80 |
| Bolts retaining shift cable bracket to transaxle | 22 | 16 | - |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.