Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Ford Freestar BaseFACTORY OEM SERVICE PROCEDURE
Steering Column Switches DTCS
SMART JUNCTION BOX DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Source | Perform Test |
|---|---|---|---|
| B1356 | Ignition RUN Circuit Open | SJB | GO to PINPOINT TEST F . |
| B1360 | Ignition RUN/ACC Circuit Open | SJB | GO to PINPOINT TEST D . |
| B1361 | Ignition RUN/ACC Circuit Short to Battery | SJB | GO to PINPOINT TEST B . |
| B1365 | Ignition START Circuit Short to Battery | SJB | GO to PINPOINT TEST A . |
| - | All Other DTCs | SJB | REFER to MULTIFUNCTION ELECTRONIC MODULES . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
