2005 Ford Excursion 6.8 S, 4WDFACTORY OEM SERVICE PROCEDURE

General Specifications

GENERAL SPECIFICATIONS

Item Specification
Fluids 
Motorcraft MERCON® Multi-Purpose (ATF) Transmission Fluid XT-2-QDX. (4R100)(1) WSS-M3C919-D
Motorcraft MERCON® SP Multi-Purpose (ATF) Transmission Fluid XT-6-QSP (TorqShift)(2) WSS-M2C919-D
NOTE:
(1) Refer to the fluid level indicator and owner guide for the type of fluid required. Some fluid labels may indicate dual usage such as MERCON® and MERCON® V. Never use dual usage fluids in transmissions that use only MERCON® type fluid. Only use dual usage fluids in transmissions that require MERCON® V Transmission Fluid.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.