2005 Ford Excursion 5.4 L, RWDFACTORY OEM SERVICE PROCEDURE

Brake System: Notes

The power brake booster may be the vacuum type or the Hydro-Boost® type.

The braking system is a front to rear split hydraulic system. For additional information, REFER to HYDRAULIC BRAKE ACTUATION .

The front wheel brakes utilize a dual piston brake caliper and disc brake system. For additional information, REFER to FRONT DISC BRAKE .

The rear brakes utilize a dual piston brake caliper and disc brake system. For additional information, REFER to REAR DISC BRAKE .

The parking brake system is a mechanical system that activates a shoe-and-drum system within the rear disc brake rotor. For additional information, REFER to PARKING BRAKE & ACTUATION .

The anti-lock brake system is a 3-channel four-wheel (4WABS). For additional information, REFER to ANTI-LOCK CONTROL - 4-WHEEL .

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.