2005 Ford Escape Hybrid, FWDFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil Gas/Electric 11.00 OZS. 0.32 L YN-12-D S
Air Cond Refrigerant Hybrid 2.56 LBS. 1.16 KG R-134a S
Automatic Transmission Fluid Hybrid 5.30 QTS. 5.01 L Motorcraft MERCON ATF (red) Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. DO NOT use MERCON CVT (blue) Automatic Transmission Fluid. This vehicle uses only Motorcraft MERCON (red) Automatic Transmission Fluid. S
Brake Fluid N/A N/A MOTORCRAFT High Performance DOT 3 Motor Vehicle Brake Fluid Fill to line on reservoir. S
Engine Oil 2.3L Eng w/Filter 4.50 QTS. 4.25 L SAE 5W-20 Premium Synthetic Blend Motor Oil Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only to meet the requirements of FORD Specification: WSS-M2C153-H and the API Certification mark. S
Fuel Tank 16.50 GALS. 62.45 L S
Manual Transmission Fluid FWD 2.40 QTS. 2.27 L API - GL-4, SAE 75W-90 Gear Oil Service refill capacity is determined by filling the Transmission to the bottom of the filler hole with the vehicle on a level surface. S
Power Steering Fluid N/A N/A MOTORCRAFT Automatic Transmission Fluid MERCON V Fill to line on reservoir. S
Transfer Case Fluid Power Transfer Unit 0.35 QTS. 0.33 L SAE 75W-140 High Performance Synthetic Rear Axle Gear Oil S
Windshield Washer Fluid 2.70 QTS. 2.55 L MOTORCRAFT Premium Windshield Washer Concentrate Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.