Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Ford Econoline E150, Van Cargo, 5.4 LFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | w/o Rear AC | 9.00 OZS. | 0.26 L | PAG 46 | S | ||
| Air Cond Compressor Oil | w/Rear A/C | 13.00 OZS. | 0.38 L | PAG 46 | S | ||
| Air Cond Refrigerant | w/Auxiliary Air Cond | 3.75 LBS. | 1.7 KG | R-134a | S | ||
| Air Cond Refrigerant | w/o Auxiliary Air Cond | 2.50 LBS. | 1.13 KG | R-134a | S | ||
| Automatic Transmission Fluid | Trans Mfr CD 4R75W | 13.90 QTS. | 13.15 L | MOTORCRAFT Automatic Transmission Fluid MERCON V | MERCON, MERCON V and MERCON SP are not interchangeable. DO NOT mix MERCON, MERCON V and MERCON SP. Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. | S | |
| Brake Fluid | N/A | N/A | MOTORCRAFT High Performance DOT 3 Motor Vehicle Brake Fluid | Fill to line on reservoir. | S | ||
| Differential Gear Oil | Rear,Visteon 8.8"/9.75",Conventional and Traction-Lok | 5.50 PTS. | 2.6 L | SAE 75W-140 Synthetic Rear Axle Gear Oil | If the vehicle's rear axle is filled with a synthetic lubricant it is considered lubricated for life. Axle lubricant quantities should not need to be checked unless a leak is suspected, service is required or the axle assembly has been submerged in water. The axle lubricant should be changed any time the rear axle has been submerged in water. Visteon TRAC-LOK axles require 4 oz. (118ml) of Additive Friction Modifier XL-3 or equivalent. Dana Limited-Slip axles (E250/350-450-550) require 8 oz. (237 ml) of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A). Fill to 1/4" to 9/16" below bottom of fill hole. | S | |
| Engine Coolant | 5.4L Eng | w/Aux Rear Heater,w/1 Row Radiator | 29.80 QTS. | 28.2 L | FORD Premium Gold Engine Coolant | If equipped with a single row radiator, there will be a label on the top side of radiator indicating "1 Row Radiator". | S |
| Engine Coolant | 5.4L Eng | w/Aux Rear Heater | 31.10 QTS. | 29.43 L | FORD Premium Gold Engine Coolant | S | |
| Engine Coolant | 5.4L Eng | w/o Aux Rear Heater,w/1 Row Radiator | 27.80 QTS. | 26.3 L | FORD Premium Gold Engine Coolant | If equipped with a single row radiator, there will be a label on the top side of radiator indicating "1 Row Radiator". | S |
| Engine Coolant | 5.4L Eng | w/o Aux Rear Heater | 29.00 QTS. | 27.44 L | FORD Premium Gold Engine Coolant | S | |
| Engine Oil | Gas | 6.00 QTS. | 5.67 L | SAE 5W-20 Premium Synthetic Blend Motor Oil | Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only to meet the requirements of FORD Specification: WSS-M2C930-A and the API Certification mark. | S | |
| Fuel Tank | Gas | 37.00 GALS. | 140.06 L | S | |||
| Power Steering Fluid | N/A | N/A | MOTORCRAFT Automatic Transmission Fluid MERCON V | Fill to line on reservoir. | S | ||
| Windshield Washer Fluid | 4.20 QTS. | 3.97 L | MOTORCRAFT Premium Windshield Washer Concentrate Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.
