Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Ford Econoline E150, Van Cargo, 5.4 LFACTORY OEM SERVICE PROCEDURE
Torque Specifications
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Brake shift interlock solenoid bolts | 9 | - | 80 |
| Ignition switch bolts | 7 | - | 62 |
| Steering column shaft-to-steering column bolt | 49 | 36 | - |
| Steering column shaft-to-steering column bolt (all except commercial chassis) | 25 | 18 | - |
| Steering column shaft-to-steering column bolt (commercial chassis vehicles built before 09/05/2005) | 25 | 18 | - |
| Steering column shaft-to-steering column bolt (commercial chassis vehicles built after 09/0502005) | 40 | 30 | - |
| Steering column shaft-to-steering gear bolt (commercial chassis) | 49 | 36 | - |
| Steering column shaft-to-steering gear bolt (all except commercial chassis) | 25 | 18 | - |
| Lock cylinder housing screws | 22 | 16 | - |
| Shift control tube screws | 9 | - | 80 |
| Steering column lower bearing retainer bolt | 10 | - | 89 |
| Steering column nuts | 15 | 11 | - |
| Steering column support bracket nuts (all except commercial chassis) | 9 | - | 80 |
| Steering column support bracket nuts (commercial chassis) | 18 | 13 | - |
| Steering wheel bolt | 38 | 28 | - |
| Transmission range selector lever arm and support bolts | 15 | 11 | - |
| Lower steering column shaft-to-steering column coupler bolt (non-commercial chassis vehicles built before 09/05/2005) | 28 | 18 | - |
| Lower steering column shaft-to-steering column coupler bolt (non-commercial chassis vehicles built after 09/05/2005) | 25 | 18 | - |
| Upper steering column shaft-to-lower steering column shaft bolt (commercial chassis vehicles built before 09/05/2005) | 49 | 36 | - |
| Upper steering column shaft-to-lower steering column shaft bolt (commercial chassis vehicles built after 09/05/2005) | 63 | 47 | - |
| Steering wheel rotation sensor screws | 1 | - | 9 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.