Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Ford Taurus SES, 3.0 2FACTORY OEM SERVICE PROCEDURE
Torque Specifications
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| All safety belt retractor bolts | 40 | 30 | - |
| All safety belt anchor bolts | 40 | 30 | - |
| All safety belt guide bolts | 40 | 30 | - |
| Safety belt buckle and pretensioner nut | 47 | 35 | - |
| Front center safety belt-to-seat track nut | 80 | 59 | - |
| Front center safety belt buckle-to-seat track nut | 80 | 59 | - |
| Second row double safety belt buckle assembly nut | 40 | 30 | - |
| Second row passenger side safety belt buckle and center safety belt anchor assembly nut (four door) | 40 | 30 | - |
| Second row seat back bolts (four door) | 55 | 41 | - |
| Second row safety belt and safety belt buckle assembly nut (wagon) | 40 | 30 | - |
| Third row safety belt buckle bolts (wagon) | 40 | 30 | - |
| Safety belt shoulder height adjuster bolt | 40 | 30 | - |
| Safety belt shoulder height adjuster nut | 40 | 30 | - |
| Center child safety seat belt tether anchor bolts (wagon) | 40 | 30 | - |
| Outboard child safety seat belt tether anchor bolts (wagon) | 28 | 21 | - |
| Child safety seat belt tether anchor bolt (four door) | 28 | 21 | - |
| Lower steering column opening cover with reinforcement | 7 | - | 62 |
| Front seat outboard retaining nut | 30 | 22 | - |
| Passenger air bag module bolts | 8 | - | 71 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.