2004 Ford Mustang Mach 1, AutomaticFACTORY OEM SERVICE PROCEDURE

Circuit Protection Devices

CIRCUIT PROTECTION DEVICES LOCATION

Component Location
Auxiliary Fuse Box (Cobra) On right side of engine compartment, on fender. See Figure.
Auxiliary Fuse Box (Mach 1) On right side of engine compartment, on fender. See Figure.
Auxiliary Fuse Box (2.6L 2V) On right side of engine compartment, on fender. See Figure.
Battery Junction Box (BJB) (Cobra) On left side of engine compartment, forward of strut tower. See Figure.
Battery Junction Box (BJB) (Mach 1) On left side of engine compartment, forward of strut tower. See Figure.
Battery Junction Box (BJB) (3.8L) On left side of engine compartment, forward of strut tower. See Figure.
Battery Junction Box (BJB) (4.6L 2V) On left side of engine compartment, forward of strut tower. See Figure.
Central Junction Box (CJB) Behind dash, left of steering column. See Figure.
Fuse Link A/B On generator rectifier system harness, near battery junction box.
Relay Box Behind left side of dash, near central junction box. See Figure.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.