2004 Ford Freestar BaseFACTORY OEM SERVICE PROCEDURE

Electrical Component Locator: Switches

SWITCHES LOCATION

Component Location
A/C Clutch Cycling Pressure Switch At right side of engine compartment, on A/C accumulator. See Figure.
A/C High Pressure Switch At center front of engine compartment. See Figure.
Anti-Theft Hood Switch At left rear side of engine compartment. See Figure.
Anti-Theft Inhibit Switch On left front door. See Figure.
Brake Fluid Level Switch At left rear side of engine compartment. See Figure.
Brake Pedal Position Switch Behind dash, top of brake pedal. See Figure.
Brake Pressure Switch At left rear side of engine compartment. See Figure.
Brake Shift Interlock On steering column. See Figure.
Detent Switch (Left) Rear of left rear door. See Figure.
Detent Switch (Right) Rear of right rear door. See Figure.
Door Ajar Switch (Left Front) Rear of left front door. See Figure.
Door Ajar Switch (Right Front) Rear of right front door. See Figure.
Fuel Door Interlock Switch Left rear of vehicle. See Figure.
Inertia Fuel Shut-Off Switch At right rear of vehicle. See Figure.
Oil Pressure Switch At lower left front of engine. See Figure.
Parking Brake Switch At base of park brake handle. See Figure.
Power Steering Pressure Switch At left rear side of engine compartment. See Figure.
Liftgate Ajar Switch Bottom of liftgate. See Figure.
Power Sliding Door Switch (Left) Left "B" pillar. See Figure.
Power Sliding Door Switch (Right) Right "B" pillar. See Figure.
Safety Belt Buckle Switch (Driver) In driver's seat belt buckle. See Figure.
Safety Belt Buckle Switch (Passenger) In passenger's safety belt buckle. See Figure.
Sliding Door Ajar Switch (Left) Bottom of left "B" pillar. See Figure.
Sliding Door Ajar Switch (Right) Right "C" pillar. See Figure.
Sliding Door Contact Switch (Left) Left "B" pillar. See Figure.
Sliding Door Contact Switch (Right) Right "B" pillar. See Figure.
Washer Fluid Level Switch At right side of engine compartment, in washer fluid reservoir. See Figure.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.