Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Ford Focus ZTW, AutomaticFACTORY OEM SERVICE PROCEDURE
Selector Lever Spring Loaded Button
- To move the selector lever from park position, the ignition lock must be set to "II", the foot brake pedal must be depressed and shift release button pressed in.
- The spring loaded side button must also be pressed, if the lever is moved from:
- N and D to 2 and 1
- 1,2, D and N to R and P
- R to P
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.