2004 Ford Focus L4-2.3L VIN ZFACTORY OEM SERVICE PROCEDURE

Piston, Engine

Piston
Diameter (1) 87.5-87.51 mm (3.444-3.445 inch)
Diameter (2) 87.51-87.52 mm (3.4452-3.4456 inch)
Diameter (3) 87.52-87.53 mm (3.444-3.446 inch)
Piston-to-bore clearance 0.025-0.045 mm (0.0009-0.0017 inch)
Piston skirt coating thickness 0.008-0.020 mm (0.0003-0.0007 inch)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.