2004 Ford Escape 2.0 BFACTORY OEM SERVICE PROCEDURE

Wiper/Washer Systems DTCS

WIPER/WASHER SYSTEMS GENERIC ELECTRONIC MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC Description Source Perform Test
B1244 Wiper Rear Motor Run Relay Circuit Failure GEM If the rear window wipers are inoperative, Go to PINPOINT TEST G . If the rear window wipers stay on continuously, GO to PINPOINT TEST H .
B1245 Wiper Rear Motor Run Relay Circuit Short to Battery GEM Go to PINPOINT TEST G .
B1611 Wiper Rear Mode Select Switch Circuit Failure GEM Go to PINPOINT TEST H
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.