Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Driver's Window Switch
Remove driver's window switch. See POWER WINDOW SWITCH under REMOVAL & INSTALLATION. See Figure or Figure . Check continuity between indicated terminals with switch in appropriate position. See DRIVER'S WINDOW SWITCH CONTINUITY (EXCEPT SUPERCREW) or DRIVER'S WINDOW SWITCH CONTINUITY (SUPERCREW) . If continuity is not as specified, replace switch.
| Switch Position | Continuity Between Connector-Terminals No. | |
|---|---|---|
| Left | ||
| Up | C535-4 & C535-7 | |
| Down | C535-4 & C535-8 | |
| Right | ||
| Up | C535-4 & C535-3 | |
| Down | C535-4 & C535-2 | |
| Switch Positions | Continuity Between Connector-Terminals No. | |
|---|---|---|
| Left Front | ||
| Up | C504b-4 & 504a-7 | |
| Down | C504b-4 & C504a-6 | |
| Right Front | ||
| Up | C504a-3 & C504b-4 | |
| Down | C504b-4 & C504a-4 | |
| Left Rear | ||
| Up | C504b-4 & C504b-5 | |
| Down | C504b-4 & C504b-6 | |
| Right Rear | ||
| Up | C504b-4 & C504b-3 | |
| Down | C504b-4 & C504a-2 | |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.