2003 Ford Windstar BaseFACTORY OEM SERVICE PROCEDURE

General Specifications

GENERAL SPECIFICATIONS

ITEMS SPECIFICATIONS
Cooling System Capacity 
Cooling System 15.1 Liters (16.0 quarts)
Coolant Types 
Motorcraft Premium ESE-M97B44-A
Engine Coolant VC-4-A (in Oregon, VC-5, in Canada, CXC-10) (green color)
Motorcraft Premium Gold WSS-M97B51-A1
Engine Coolant VC-7-A (yellow color)
Other Chemicals 
Premium Cooling System ESR-M14P7-A
Flush VC-1
Pipe Sealant with Teflon® D8AZ-19554-A
Cooling System Pressure Test Specification 
Cooling System 110 kPa (16 psi)
Radiator Cap Pressure Test Specification 
Cap 97-124 kPa (14-18 psi)
Thermostat Opening Temperatures 
Starts to Open 84-88°C (183-190°F)
Fully Open 99°C (210°F)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.