Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2003WINDSTAR BASEREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEXLIGHTING SYSTEMS (DTCS)EXTERIOR LIGHTING DTCS
2003 Ford Windstar Base
Exterior Lighting DTCS
2003 Ford Windstar BaseSECTION Exterior Lighting DTCS
INSTRUMENT CLUSTER DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Source | Action/Go to |
|---|---|---|---|
| B1342 | ECU is Defective | ICM | CLEAR and DOCUMENT the DTCs. CARRY OUT the ICM On-Demand Self-Test. INSTALL a new instrument cluster if DTC B1342 is retrieved again. REFER to INSTRUMENT CLUSTER |
| B1470 | Lamp Headlamp Input Circuit Failure | ICM | GO to PINPOINT TEST F: THE HIGH BEAMS ARE INOPERATIVE . |
| B1875 | Turn Signal/Hazard Switch Signal Circuit Failure | ICM | GO to PINPOINT TEST AG: THE TURN SIGNAL LAMPS ARE NEVER/ALWAYS ON - RH (RH) or AH (LH). |
FRONT ELECTRONIC MODULE (FEM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
REAR ELECTRONIC MODULE (REM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.