Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2003 Ford Focus SVT, 2D HatchbackFACTORY OEM SERVICE PROCEDURE
Engine Data
Engine Specifications Chart
| Description | 2.0L DOHC 16V |
|---|---|
| Engine management | EEC V/SEFI |
| Firing order | 1-3-4-2 |
| Bore | 84.8 mm |
| Stroke | 88.0 mm |
| Number of main bearings | 5 |
| Cubic capacity (cm3 ) | 1,988 |
| Compression ratio | 10.2:1 |
| Maximum engine power | 170 hp |
| Maximum engine speed | 7,000 rpm |
| Maximum engine torque at 5,500 rpm | 198 lb ft |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.