Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Ford ZX2 StandardFACTORY OEM SERVICE PROCEDURE
Anti-Lock Brake Control Module Diagnostic Trouble Code (DTC) Index
DIAGNOSTIC TROUBLE CODE (DTC) INDEX
| DTCs | Description | DTC Caused By | Action |
|---|---|---|---|
| B1318 | No/Low Voltage To Anti-Lock Brake Control Module. | ABS | Go To PINPOINT TEST Q . |
| B1342 | Anti-Lock Brake Control Module Failure. | ABS | INSTALL a new anti-lock brake control module. REFER to MODULE - ANTI-LOCK BRAKE CONTROL . TEST the system for normal operation. |
| C1095 | Pump Motor Shorted. | ABS | Go To PINPOINT TEST B . |
| C1096 | Pump Motor Open. | ABS | Go To PINPOINT TEST C . |
| C1115 | Shorted Anti-Lock Relay. | ABS | Go To PINPOINT TEST D . |
| C1140 | Excessive Dump Time Fault. | ABS | Go To PINPOINT TEST E . |
| C1145 | RF Anti-Lock Brake Sensor (Static). | ABS | Go To PINPOINT TEST F . |
| C1148/C1234 | RF Anti-Lock Brake Sensor (Dynamic). | ABS | Go To PINPOINT TEST G . |
| C1155 | LF Anti-Lock Brake Sensor (Static). | ABS | Go To PINPOINT TEST F . |
| C1158/C1233 | LF Anti-Lock Brake Sensor (Dynamic). | ABS | Go To PINPOINT TEST G . |
| C1165 | RR Anti-Lock Brake Sensor (Static). | ABS | Go To PINPOINT TEST H . |
| C1168/C1235 | RR Anti-Lock Brake Sensor (Dynamic). | ABS | Go To PINPOINT TEST J . |
| C1175 | LR Anti-Lock Brake Sensor (Static). | ABS | Go To PINPOINT TEST H . |
| C1178/C1236 | LR Anti-Lock Brake Sensor (Dynamic). | ABS | Go To PINPOINT TEST J . |
| C1184 | Excessive ABS Isolation. | ABS | Go To PINPOINT TEST K . |
| C1185 | Open Anti-Lock Relay. | ABS | Go To PINPOINT TEST L . |
| C1194/C1196 | Open or Shorted LF Dump Valve Solenoid. | ABS | Go To PINPOINT TEST N . |
| C1198/C1200 | Open or Shorted LF Isolation (ISO) Valve Solenoid. | ABS | Go To PINPOINT TEST M . |
| C1220 | Anti-Lock Brake Warning Indicator Shorted. | ABS | Go To PINPOINT TEST P . |
| C1222 | Wheel Speed Error. | ABS | Go To PINPOINT TEST K . |
| C1210/C1212 | Open or Shorted RF Dump Valve Solenoid. | ABS | Go To PINPOINT TEST N . |
| C1214/C1216 | Open or Shorted RF Isolation (ISO) Valve Solenoid. | ABS | Go To PINPOINT TEST M . |
| C1242/C1244 | Open or Shorted LR Dump Valve Solenoid. | ABS | Go To PINPOINT TEST N . |
| C1246/C1248 | Open or Shorted RR Dump Valve Solenoid. | ABS | Go To PINPOINT TEST N . |
| C1250/C1252 | Open or Shorted LR Isolation (ISO) Valve Solenoid. | ABS | Go To PINPOINT TEST M . |
| C1254/C1256 | Open or Shorted RR Isolation (ISO) Valve Solenoid. | ABS | Go To PINPOINT TEST M . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.