Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Ford Windstar BaseFACTORY OEM SERVICE PROCEDURE
Electrical Component Locator: Switches
SWITCHES LOCATION
| Component | Location |
|---|---|
| A/C Clutch Cycling Pressure Switch | In right front of engine compartment, on A/C accumulator. See Figure. |
| A/C High Pressure Switch | Center front of engine compartment. See Figure. |
| Anti-Theft Hood Switch | At left rear of engine compartment. See Figure. |
| Brake Fluid Level Switch | On master cylinder reservoir. |
| Brake Fluid Warning Switch | Left rear of engine compartment. See Figure. |
| Brake Pedal Position (BPP) Switch | Behind dash, top of brake pedal. See Figure. |
| Brake Pressure Switch | On left rear of engine compartment. See Figure. |
| Engine Oil Pressure Switch | On lower left front of engine. See Figure. |
| Ignition Cylinder Tamper Switch | Right side of steering column. |
| Inertia Fuel Shut-Off (IFS) Switch | In right rear of luggage compartment. |
| Left Door Ajar Switch | On rear of driver's door. |
| Left Liftgate Ajar Switch | Lower left side of liftgate. |
| Parking Brake Switch | At base of park brake handle. See Figure. |
| Passenger Seat Belt Buckle Switch | In passenger seat belt buckle. |
| Power Steering Pressure Switch | Left side of engine compartment. |
| Right Door Ajar Switch | On rear of passenger's front door. |
| Right Liftgate Ajar Switch | Lower right side of liftgate. |
| Right Sliding Door Ajar Switch | At right "C" pillar. See Figure. |
| Seat Belt Buckle Switch | In driver's seat belt buckle. See Figure. |
| Tire Reset Switch | At left side of dash. |
| Washer Fluid Level Switch | On right side of engine compartment, in washer fluid reservoir. See Figure. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.