Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Description & Operation: Notes
Power windows are standard on all models. On coupe models, only front side windows can be raised or lowered. Rear side windows are fixed. On convertible models, front and rear side windows can be raised and lowered. Rear side windows can only be operated by driver's master control switch. On all models, windows will only operate when ignition switch is in ON or ACC position.
Driver's master control switch, which controls all windows, is located on left door. Driver's door window is equipped with a one-touch down feature. To lower driver's window to full down position, briefly touch driver's door window switch in down position. Briefly touching driver's door window switch in down position a second time with one-touch down feature activated will stop the window. A lock-out switch is incorporated into driver's master switch on some models. When actuated, it prevents window operation from passenger's switch.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.