Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Driver's Power Window Control Switch (2-Door)
Remove power window control switch. See POWER WINDOW CONTROL SWITCH under REMOVAL & INSTALLATION.
Check continuity between specified terminals at appropriate connector with switch in specified position. See DRIVER'S POWER WINDOW CONTROL SWITCH TESTING (2-DOOR) table. See Fig 1. If continuity does not exist as specified, replace switch and retest system operation.
| Test Between Terminals No. | Switch Position | Continuity | |
|---|---|---|---|
| Left Front Power Window Switch | |||
| 1 & 8 | Neutral | Yes | |
| 1 & 8 | Up | No | |
| 8 & 10 | Neutral | No | |
| 8 & 10 | Up | Yes | |
| Right Front Power Window Switch | |||
| 1 & 3 | Neutral | Yes | |
| 1 & 3 | Up | Yes | |
| 1 & 3 | Down | No | |
| 1 & 5 | Neutral | Yes | |
| 1 & 5 | Up | No | |
| 1 & 5 | Down | Yes | |
| 3 & 10 | Neutral | No | |
| 3 & 10 | Up | No | |
| 3 & 10 | Down | Yes | |
| 5 & 10 | Neutral | No | |
| 5 & 10 | Up | Yes | |
| 5 & 10 | Down | No | |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.