Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Ford Focus SVTFACTORY OEM SERVICE PROCEDURE
Electrical Component Locator: Switches
SWITCHES LOCATION
| Component | Location |
|---|---|
| A/C Compressor Cycling Switch | In left rear corner of engine compartment. See Figure. |
| Brake Fluid Level Switch | On top of master cylinder reservoir. See Figure. |
| Brake Pedal Position Switch | Under left side of dash, on lower right side of pedal bracket. |
| Clutch Pedal Position Switch | Under left side of dash, on left side of pedal bracket. |
| Dual Pressure Switch | In right front corner of engine compartment. See Figure. |
| Engine Compartment Switch | In front center of engine compartment. |
| Inertia Fuel Shut-Off (IFS) Switch | Behind right kick panel. See Figure. |
| Oil Pressure Switch (2.0L CVH) | On right side of cylinder block. See Figure. |
| Oil Pressure Switch (2.0L ZETEC-E) | On right side of cylinder block, near oil filter. See Figure. |
| Park Brake Switch | Under center console, at base of park brake lever bracket. |
| Park/Neutral Position (PNP) Switch (2.0L CVH) | On lower left side of transmission. |
| Park/Neutral Position (PNP) Switch (2.0L ZETEC-E) | On top rear of transmission. See Figure. |
| Power Steering Pressure Switch (2.0L CVH) | Near left front of cylinder head, on power steering pump. See Figure. |
| Power Steering Pressure Switch (2.0L ZETEC-E) | Near left front of cylinder head, on power steering pump. See Figure. |
| Seat Belt Buckle Switch | On driver's side seat belt latch. |
| Start Inhibit Switch | Under left side of dash, on left side of pedal bracket. |
| Stoplamp Switch | Under left side of dash, on upper right side of pedal bracket. |
| Tailgate/Deck lid Anti-Theft Switch (Wagon) | On center of tailgate, near locking mechanism. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.