2002 Ford Focus SVTFACTORY OEM SERVICE PROCEDURE

Description & Operation

Power windows are operated by reversible motors mounted on each individual window regulator. Each passenger window has its own individual control switch. Driver's power window control switch controls all windows and is located on left front door. Driver's power window control switch has a one-touch down feature. Window will move to its full down position by momentarily pressing window control switch completely down then releasing. Pressing window control switch again stops one-touch down operation. The one touch down relay is located behind the drivers door panel.

A lock-out switch is incorporated in driver's power window control switch on 4-door models. When actuated, lock-out switch prevents rear window operation from their individual switches. Power windows will only operate when ignition switch is in RUN or ACC position.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.