2002 Ford Escape 3.0 1, 4WDFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil Gas 9.00 OZS. 0.26 L YN-12-C S
Air Cond Refrigerant 1.88 LBS. 0.85 KG R-134a S
Automatic Transmission Fluid 3.0L Eng w/Oil Cooler 10.20 QTS. 9.65 L MOTORCRAFT Automatic Transmission Fluid MERCON DO NOT mix MERCON and MERCON V. S
Brake Fluid N/A N/A MOTORCRAFT High Performance DOT 3 Motor Vehicle Brake Fluid Fill to line on reservoir. S
Differential Gear Oil 4WD Rear 2.96 PTS. 1.4 L SAE 80W-90 Premium Rear Axle Gear Oil Fill to 1/4" to 3/4" (6 mm to 19 mm) below bottom of fill hole. S
Engine Coolant 3.0L Eng 10.60 QTS. 10.03 L FORD Premium Cooling System Fluid or FORD Extended Life Engine Coolant If the vehicle's coolant is (green color) use: FORD Premium Cooling System Fluid. If it is (orange color) use: FORD Extended Life Engine Coolant. S
Engine Oil 3.0L Eng w/Filter 5.50 QTS. 5.2 L SAE 5W-20 Premium Synthetic Blend Motor Oil Refer to Engine Oil recommended applications for SAE 5W-20 and 5W-30 motor oils TSB No. 02-1-9. S
Fuel Tank 3.0L Eng 16.00 GALS. 60.56 L S
Manual Transmission Fluid 4WD 2.32 QTS. 2.19 L API - GL-4, SAE 75W-90 Gear Oil S
Power Steering Fluid N/A N/A MOTORCRAFT Automatic Transmission Fluid MERCON V Fill to line on reservoir. S
Transfer Case Fluid 4WD,Automatic Trans Power Transfer Unit 0.35 QTS. 0.33 L SAE 75W-140 High Performance Synthetic Rear Axle Gear Oil S
Windshield Washer Fluid 2.70 QTS. 2.55 L MOTORCRAFT Premium Windshield Washer Concentrate Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.