Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Fire Suppression Module (FSM)
The FSM (if equipped) is connected to the CAN and the international standards organization (ISO) 9141 communications network. The fire suppression system is designed to help reduce the risk of fire in high speed rear impacts. The fire suppression system deploys chemicals designed to suppress the spread of fire or potentially extinguish a fire, thereby providing more time for occupants to escape from a crashed vehicle.
Check the CAN and ISO 9141 communications network circuits between the FSM C3281a and the DLC C251. The total resistance values must not be more than 5 ohms. If the resistance is more than 5 ohms, there is an open circuit in the CAN or ISO 9141 communications network, damage to the DLC C251, damage to the FSM C3281a, or a problem in the in-line connector.
For additional FSM information, refer to FIRE SUPPRESSION SYSTEM .
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.