Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2001 Ford Explorer ChassisFACTORY OEM SERVICE PROCEDURE
Electrical Component Locator: Switches
SWITCHES LOCATION
| Component | Location |
|---|---|
| A/C Clutch Cycling Pressure Switch (4.0L) | In right side of engine compartment, on A/C accumulator. See Figure . |
| A/C Clutch Cycling Pressure Switch (5.0L) | In right side of engine compartment, on A/C accumulator. See Figure . |
| A/C Pressure Cutoff Switch | Near A/C compressor clutch solenoid. |
| Brake Fluid Level Warning Switch (4.0L) | Mounted on left side of master cylinder. See Figure . |
| Brake Fluid Level Warning Switch (5.0L) | Mounted on left side of master cylinder. See Figure . |
| Brake Pedal Position (BPP) Switch | Above brake pedal. |
| Brake Pressure Switch | Left rear corner of engine compartment. |
| Clutch Pedal Position Switch | Above clutch pedal. |
| Engine Coolant Level Switch | Right side of engine compartment. |
| Engine Low Oil/Temperature Switch | On left side of engine, at oil pan. |
| Engine Oil Pressure Switch (4.0L) | On engine, next to power steering pump. See Figure . |
| Engine Oil Pressure Switch (5.0L) | On engine, next to power steering pump. See Figure . |
| Inertia Fuel Shut-Off Switch | Behind right front kick panel. |
| Liftgate Disarm Switch | Near liftgate lock cylinder. |
| Liftgate Lock Switch | In liftgate. |
| Low Washer Fluid Level Switch | Near blower motor. |
| Parking Brake Switch | On right side of parking brake lever. |
| Reversing Light Switch (M/T) | Left side of transmission adapter. |
| Seat Belt Warning Switch | In driver's seat belt buckle. |
| Transmission Control Switch (TCS) | End of transmission selector lever. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.