Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2001 Ford Explorer ChassisFACTORY OEM SERVICE PROCEDURE
Memory Seats
This system allows automatic positioning of driver's seat to 3 programmable positions.
- To program position No. 1, move driver's seat to desired position using seat control switch. Depress SET button. Within 5 seconds, depress button No. 1.
- To program position No. 2, repeat procedure, depressing button No. 2.
- To program position No. 3, repeat procedure. Depress buttons No. 1 and 2 simultaneously.
- To recall position No. 1, depress button No. 1. To recall position No. 2, depress button No. 2. To recall position No. 3, depress buttons No. 1 and 2 simultaneously.
A preset position can only be recalled when transmission selector is in Park or Neutral. A position can be programmed at any time.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.