2000 Ford ZX2 StandardFACTORY OEM SERVICE PROCEDURE

Symptom Chart

WARNING: This page is about a different car, the 2004 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
PROBLEM SYMPTOM CHART

Condition Possible Sources Action
  • No communication with the anti-lock brake system (ABS) module
  • Battery junction box (BJB) fuse 46 (7.5A).
  • Central junction box (CJB) fuse 21 (20A).
  • Circuitry.
  • Anti-lock brake system (ABS) module.
  • Unable to enter self-test
  • Anti-lock brake system (ABS) module.
  • The red brake warning indicator does not self-check
  • Circuitry.
  • Instrument cluster.
  • Anti-lock brake system (ABS) module.
  • The yellow ABS warning indicator does not self-check
  • Circuitry.
  • Anti-lock brake system (ABS) module.
  • Instrument cluster.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.