2000 Ford ZX2 StandardFACTORY OEM SERVICE PROCEDURE

Symptom Chart

WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
PROBLEM SYMPTOM CHART

Condition Possible Sources Action
  • No communication with the navigation system module
  • Battery junction box (BJB) fuse 14 (10A).
  • Circuitry.
  • Navigation system module.
  • Navigation system does not operate correctly - the global positioning system (GPS) antenna signal is inoperative
  • Circuitry.
  • GPS antenna.
  • Navigation system module.
  • Navigation system does not operate correctly - the position cursor is inoperative
  • Circuitry.
  • Navigation system module.
  • Navigation system does not operate correctly - the voice guidance is inoperative/does not operate correctly
  • Circuitry.
  • Audio unit.
  • Navigation system module.
  • Navigation system does not operate correctly - the display screen is inoperative
  • Circuitry.
  • Audio unit.
  • Navigation system module.
  • Navigation system does not operate correctly - the navigation screen is inoperative
  • Circuitry.
  • Audio unit.
  • Navigation system module.
  • Navigation system does not operate correctly - the audible switches are inoperative
  • Circuitry.
  • Audio unit.
  • Navigation system module.
  • Navigation system does not operate correctly - unable to insert or eject map disc
  • Circuitry.
  • Navigation system module.
  • Navigation system does not operate correctly - the audio unit is inoperative
  • Central junction box(CJB)fuse(s):
    • 2(5A)
    • 18(20A)
  • Circuitry.
  • Audio unit.
  • Navigation system module.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.